Question 1

How accurate are the roof measurements?

Accepted Answer

Voxaris measures your roof using Google's Solar API photogrammetry combined with high-resolution satellite imagery. On properties with high-resolution imagery (most of suburban Florida), accuracy is typically within 2 percent of professional aerial roof reports. Final measurement is confirmed on site by a licensed roofer before any binding quote.

Question 2

Where does the roof data come from?

Accepted Answer

Three independent public sources. Google's Solar API provides photogrammetric roof segments (sloped area, pitch, azimuth per facet). Google Static Maps provides the satellite photograph. Florida statewide cadastral records (via the Florida Geographic Information Office) provide year built, lot size, and county assessed value. Recent severe-weather events come from the National Weather Service Local Storm Reports mirrored by the Iowa Environmental Mesonet.

Question 3

Do I need to be home for the estimate?

Accepted Answer

No. The entire estimate is generated from public satellite imagery and county records. No one visits your property unless you specifically request a rep to come on site to confirm the final scope of work.

Question 4

How long does the estimate take?

Accepted Answer

About 30 to 50 seconds. Voxaris fetches the satellite tile, runs roof segmentation, looks up your county parcel record, and pulls recent severe-weather history — all in parallel.

Question 5

Was my estimate generated by AI?

Accepted Answer

The roof visualization uses Google Gemini for image annotation and Google's Solar API for measurement. The pricing math is deterministic and calibrated against actual Florida contractor markets — not generated by AI. Every estimate is reviewed by a licensed roofer before any binding quote is issued. If a follow-up call is part of the flow, it may be placed by an AI voice assistant; the consent disclosure makes this clear at opt-in.

Question 6

Is this estimate binding?

Accepted Answer

No. The displayed price is a quick satellite-based estimate. Final pricing depends on what a licensed roofer finds on site — decking condition, existing layers, code work, manufacturer requirements. The estimate sets honest expectations and lets you decide whether to invite a rep for a site visit.

Question 7

What do the three pricing tiers include?

Accepted Answer

Essentials covers a code-compliant reroof on solid 30-year shingle with a basic kit. Standard adds premium architectural shingle (GAF Timberline HDZ or Owens Corning Duration), synthetic underlayment, ice and water shield in valleys and at penetrations, pre-finished aluminum drip edge, hip and ridge cap shingles, and a 130 mph wind warranty. Fortified is impact-rated and qualifies for Florida premium discounts. All tiers include tear-off, ridge cap, flashing, labor, and haul-away.

Question 8

Why three tiers instead of one quote?

Accepted Answer

Florida providers offer real discounts on impact-rated roofs. The three tiers reflect actual category breaks between code-minimum, premium architectural, and impact-rated — letting you weigh up-front cost against policy premium savings instead of negotiating a single number. Most Florida homeowners pick Standard.

Question 9

Does this work for tile, metal, or slate roofs?

Accepted Answer

Voxaris detects the roof material from the satellite imagery and quotes at material-appropriate rates. When material detection confidence is below a strict threshold, the system quotes at architectural-shingle prices by default — under-pricing slightly on a tile or metal roof rather than wildly over-quoting on a wrong guess. A rep adjusts the final material on site.

Question 10

Why is part of the roof quoted separately?

Accepted Answer

If your home has low-slope sections (under approximately a 2.5-in-12 pitch — common on lanai covers and screened-porch roofs), those areas are listed on the estimate but priced separately on site. Low-slope roofs require a different material (TPO membrane or modified bitumen) than the main asphalt-shingle area, with different installation requirements and manufacturer warranties.

Question 11

How is severe weather information used?

Accepted Answer

Wind, hail, and tornado reports within 25 miles of your address over the past 12 months are pulled from National Weather Service Local Storm Reports. This information is displayed for context only — it does NOT change your estimate price. It exists so you know what your roof has been through, and so you can make an informed decision about the impact-rated tier.

Question 12

Is my address shared with contractors?

Accepted Answer

Your address is shared only with the local roofing office that serves your area, and only after you submit the form requesting an in-person visit. Voxaris does not sell or share lead data with third parties outside the partner office that will service your job.

What will it costto replace your roof?